|
|
Bit specifactions
All of our bits are a of Never-Pinch design.
No pinch points will ever develop no matter how much our bits are used ! Guaranteed !
 |
Specifications of the "One Hander"
1 ) Total length measured from where the bridle attaches to where the reins attach is 8 1/2".
2 ) The length of the shank, from the center line of the mouth piece to where the reins attach is 7 3/8".
3 ) Measuring from where the bridle attaches to the center line of the mouth piece is 2 7/8".
4 ) The port diameter is 3/8", The bar contact area diameter is 1/2".
5 ) The effective leverage ratio is 2.565 : 1 (7 3/8" divided by 2 7/8") which is less than most conventional bits.
6 ) All joints are "O" Ring sealed to insure smooth operation under all conditions.
7 ) The port is considered a medium height and is a floating port so the horse can put it where it is the most comfortable for that particular horse. No pressure is ever applied to the horse's tongue or palate.
8 ) The standard width mouth piece is adjustable from 4 1/2" thru 5 3/8" for a perfect fit to nearly any horse. Optional adjustable widths are available,
> CLICK HERE TO SEE PORT OPTIONS <
9 ) The weight of the One Hander is 17oz. and the balance is excellent.
10 ) Made entirely of 300 grade stainless steel containing 8% copper.
11 ) Distinctive satin finish.
All measurements are in a straight line as per AQHA rules.
Questions or comments? Click here to Email us.
An instruction sheet for proper fitting and use is included with your order
|
 |
"EZ Rider" curb bit Specifications Effective leverage ratios :
1) SHANK LENGTH 5", purchase length 2.7/8" = 1.74 : 1 ratio. in Normal leverage position.
2) Shank length 5 5/8", purchase length 2 1/4" = 2.50: 1 ratio in Increased leverage position.
3) Note: an average conventional curb bit with a shank length of 5 1/4", purchase length of 2 1/2" = 2.1 : 1 ratio.
4) Length: overall length AQHA = straight line measured length 8.0"
Width adjustment range;
Standard port, 4 1/2" thru 5 3/8 "
> CLICK HERE TO SEE PORT OPTIONS <
5) Material: All 300 grade stainless steel with 8% copper, Weight: 15 oz.
6) Distinctive Satin Finish.
7) All joints are "O" Ring sealed for extended life and clean, smooth operation under all conditions.
All these unique features and a 30 day satisfaction guarantee
CLICK HERE TO READ OUR CUSTOMERS COMMENTS Questions or comments? Click here to Email us |
 |
"Ringmaster"Specifications
1 ) The mouth piece is three part assembly, the port and the 2 cheek pieces.
2 ) The port diameter is 3/8", The bar contact area diameter is 9/16".
3 ) The Modified "D" rings are 3 3/4" high by 3" wide (outside dimensions)
4 ) The standard port is a medium height and floats so the horse can position it
where it is the most comfortable for that particular horse.
( Availabe with Mullen Mouth port option for English and Dressage showing.)
> see port options <
5 ) There is no nut-cracker action as with a conventional snaffle bits and
no pressure is ever applied to the horse's tongue or palate.
6 ) The standard width port is adjustable from 4 1/2" thru 5 3/8" for a perfect fit
to nearly any horse.
7 ) Optional Extra wide widths are available, Choose your width range when
you place your order.
8 ) All joints are "O" Ring sealed to insure smooth operation under all conditions.
9 ) The weight of the Ringmaster is 11.9 oz.
10 ) Distinctive Satin Finish.
11 ) Our bits contain 8% copper for the taste horses love, and to maintain a soft mouth.
* Instruction sheet for proper fitting and use included. *
Questions or comments? Click here to Email us
|
 |
Freedom Rider specifactions
1 ) The mouth piece is three part assembly, the port and the 2 cheek pieces.
2 ) The port diameter is 3/8", The bar contact area diameter is 9/16".
3 ) The shank lenght is 3 1/4" with a purchase lenght of 2 1/2".
This means the Freedom Rider applies 11% more pressure than a ring type bit.
4 ) The standard port is a medium height and floats so the horse can position it where it is the most comfortable for that particular horse.
( Available with optional Mullen Mouth port for English and Dressage showing.)
> View port options <
5 )There is no nut-cracker action as with a conventional snaffle bits and
no pressure is ever applied to the horse's tongue or palate.
6) The standard width port is adjustable from 4 1/2" thru 5 3/8" for a perfect fit to any horse.
7 ) Optional Extra wide widths are available, Choose your width range when you place your order.
8 ) All joints are "O" Ring sealed to insure smooth operation under all conditions.
9 ) The weight of the Freedom Rider is 13 oz.
10 ) Distinctive Satin Finish.
11) Our bits contain 8% copper for the taste horses love, and to maintain a soft mouth.
12) Includes a 30 day satisfaction guarantee and a Life-Time Warranty.
* Instruction sheet for proper fitting and use included. *
Questions or comments? Click here to Email us |
|
|
|
 |
 |
|
